How a 6" x 28" Stainless Steel Kick Plate Protects Your Door

Kick plates located near entrances, kitchens, and loading docks receive continuous kicking, dragging, and banging, which destroys the paint on the doors in no time at all. The installation of a plate to protect the doors from any kind of damage has become the need of the hour, which is why property owners in Canada have come to us to shop all the necessities for their door protection. 

A 6” x 28” stainless steel kick plate is among the most commonly sought-after plates due to its ease of fitting as well as protecting the entire door from damage.

What Factors Are In Favour Of Using Door Kick Plates?

Doors endure more wear-and-tear than most other building installations do. The bottom surface of the doors becomes scratched, the paint starts to peel away, and the wood itself gets damaged from daily contact with boots, dollies, strollers, and even animals' claws. The moisture in the air and water start entering the cracks, causing the wood to warp and rot. The installation of a metal plate at the bottom of the door creates an extra barrier between the surface of the door and anything that touches it. Rather than being the target of the impacts, the door itself becomes protected by a piece of material that can withstand repeated impact without breaking or getting dented.

Reasons Why You Should Go for 6" x 28" Kick Plate

Door hardware should be sized right to make sure there is no gap between it and the edge of the door, and also not too big such that it appears ungainly. The 6" x 28" is just right because it fits the lower part of the door well without being too bulky and getting in the way of the hardware and hinges.

This size is perfect for residential and light commercial doors because the width does not require a larger size. This size is also easy to install using simple tools because it is one of the standard sizes, and hence the holes and trim lines are predictable. Those who wish to replace their old kick plates will have an easier time because they don't need to alter the door in any way.

Why is the Use of Stainless Steel Protection Useful in Practice?

Stainless steel has always been the material of choice for Just kick plates because it can withstand circumstances that other materials like painted wood or plastic would not last a year under. It is rustproof, does not crack off as coatings tend to, and requires minimum maintenance to stay good-looking.

• Resistance to corrosion, even from rain, melted snow, and cleaning substances
• Scratch-proof finish that remains attractive despite many years of use
• Simple cleaning process without the need for specific polishing agents or coatings
• Neutral look that will fit any interior in homes, offices, and storefronts
• Long lifespan which helps reduce frequency of replacement

It is due to these features that stainless steel is chosen for kick plates more often than aluminum and plastic options.

Why Should You Choose a Stainless Steel Kick Plate 6" x 28"?

There isn't always a universal doorplate size that works best for every door, so there are other sizes available beyond the usual one. For narrow doors, the size of 6" x 28" is great, but some wide commercial doors will require more protection at their base by providing an even larger plate. However, when you find it hard to estimate your plate's suitability, it is possible to ask for help by contacting us prior to purchasing the product.

When doors have a somewhat larger width, you might want to choose a 6 x 30 stainless steel kick plate since this additional inch and a half on each side will allow covering all parts of the door frame completely. If you deal with heavier commercial doors, especially in institutional and industrial areas, you might consider using a 6" x 34" stainless steel kick plate, as it will be able to cope with such frames easily.

Where Should This Size Be Placed?

However, not all doors in one building need a kick plate installed on them. But there are places that are going to benefit from them a lot more than other places.

• Main entrances which receive traffic all day long
• Kitchens and back area doors that have cart traffic
• Doors in offices near the hallway where there is frequent traffic
• Unit doors in apartments or condominiums that have traffic in the hallway
• Entrances in retail stores that receive customers who use their hands to push the doors open

Installing this size in these particular places will make sure that you are installing it in the right places first.

What are the Necessary Installation Procedures to Ensure Optimal Operation of the Plate?

Even a quality plate would underperform if it is not installed in the correct manner. This would lead to improper operation of the door. Therefore, it is necessary to ensure that the correct procedures are followed during installation.

• Take measurements of the door before placing the order in order to ascertain that the plate fits properly
• Thorough cleaning of the surface to ensure proper adhesion of the plate
• Ensure that the plate is firmly pressed against the bottom edge of the door
• The use of corrosion-resistant screws matching the material of the door

These procedures will guarantee optimal performance of the plate throughout its operational lifespan.

Is There Value in Investing in 6" x 28" Stainless Steel Kick Plate?

There are some people who do not readily purchase any additional pieces of hardware that do not seem necessary at first glance; however, investing in a kick plate saves you money because refinishing and repairing a door which is subjected to scuffs throughout the years costs much more than a plate does.

The labour cost will become an added expense if you need the service of a contractor. In essence, a 6" x 28" stainless steel kick plate repays its value simply due to the fact that it takes all the impact which would hit your door otherwise. It means that for rentals, commercial and household use, it makes a door last for years without requiring maintenance at all.

What Features Should You Consider When Purchasing a Stainless Steel Kick Plate 6" x 28"?

There are several aspects to consider, as not all plates are equal. Gauge is an important thing, as a thin one may be dented by constant impacts while a bit thicker one will keep its shape for many years. Mounting holes will be very useful, particularly if you want to mount your plate yourself without the assistance of specialists.

The finish is another thing that buyers tend to forget about. A brushed or satin finish on the stainless steel kick plate 6" x 28" will conceal fingerprints and scratches better than a mirror one, as the latter reflects everything. It is also worth checking whether there are no burrs at the edges.

How Do Winter Weather Conditions in Canada Affect Entry Door Protection?

Winter weather is very different from what one experiences during summer, and it brings along some additional requirements when it comes to protecting doors. The snow, melting ice, and salt left by boots when entering right into the door's bottom part cause untreated wood or just painted wooden trim of doors to become softer and peel off.

The metal plate prevents water and salt deposits from coming into contact with the door's surface. Cleaning the plate of all dirt does not take much time at all and, unlike wood, it does not absorb the salt and moisture.

Will the Kick Plate Be Compatible with Door Styles?

Another frequent question relates to the compatibility of the plate with the current style of the door, particularly in the case of old houses or doors featuring elaborate trim. The stainless steel has an understated design which does not conflict with other finishes, but complements them. Thus, a polished plate looks well with contemporary doors featuring modern hardware, while the brushed satin finish would fit old and traditional houses better.

Since the plate is located relatively low on the door and away from the center of attention, it will hardly affect the general look of the door and will simply perform its functions efficiently.

Maintaining Your Doors’ Good Appearance for Years

A good kick plate is a relatively small investment, but it will save you from having to spend a huge amount on a much more expensive maintenance process later. Choosing the right size, stainless steel, and installation procedure will be the keys to its performance longevity. No matter whether it's your door in the residential entrance, office hall or a commercial facility, this kind of plate will help you keep the bottom of the door away from all kinds of contact.

Ready to provide protection for your doors? Contact us and check out the available sizes and order now!